Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6654MFIC OPAMP VFB 1 CIRCUIT SOT23-5 |
14,840 |
|
Datasheet | LMH® | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | - | 200V/µs | 260 MHz | - | 5 µA | 1 mV | 4.5mA | 120 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
LMH6723MFXIC OPAMP CFA 1 CIRCUIT SOT23-5 |
12,000 |
|
Datasheet | LMH® | SC-74A, SOT-753 | Bulk | Active | Current Feedback | 1 | - | 600V/µs | - | 370 MHz | 2 µA | 1 mV | 1mA | 110 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMH6622MMIC OPAMP VFB 2 CIRCUIT 8VSSOP |
400 |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | Differential | 85V/µs | - | 160 MHz | 4.7 µA | 200 µV | 4.3mA (x2 Channels) | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
CLC111AJPIC BUFFER 1 CIRCUIT 8MDIP |
3,606 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Buffer | 1 | - | 3500V/µs | - | 800 MHz | 5 µA | - | 10.5mA | 60 mA | 10 V | 10 V | -40°C ~ 85°C | - | - | Through Hole | 8-MDIP |
|
CLC404AJM5XIC OPAMP CFA 1 CIRCUIT 48HLQFP |
15,000 |
|
Datasheet | - | 48-LQFP Exposed Pad | Bulk | Obsolete | Current Feedback | 1 | - | 2600V/µs | - | 175 MHz | 15 µA | 2 mV | 11mA | - | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 48-LQFP (7x7) |
|
LM10CLWMIC OPAMP GP 1 CIRCUIT 14-SOIC |
1,857 |
|
Datasheet | - | 14-SOIC (0.295", 7.50mm Width) | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | - | - | 12 nA | 500 µV | 280µA | 20 mA | 1.1 V | 40 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LMC6574AINIC OPAMP GP 4 CIRCUIT 14DIP |
2,545 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Push-Pull, Rail-to-Rail | 0.09V/µs | 220 kHz | - | 10 pA | 500 µV | 160µA (x4 Channels) | 6 mA | 2.7 V | 11 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 14-PDIP |
|
|
CLC5632IMIC BUFFER 2 CIRCUIT 8SOIC |
721 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 2 | Differential | 290V/µs | - | 130 MHz | 5 µA | 13 mV | 3.2mA | 130 mA | 14 V | 14 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LMV822MXIC OPAMP GP 2 CIRCUIT 8SOIC |
12,000 |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5.6 MHz | - | 40 nA | 1 mV | 500µA (x2 Channels) | 45 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
LMC6034INIC CMOS 4 CIRCUIT 14DIP |
6,028 |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | - | 1.1V/µs | 1.4 MHz | - | 0.04 pA | 1 mV | 1.5mA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
