Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMC662ENIC CMOS 2 CIRCUIT 8MDIP |
3,387 |
|
Datasheet | LMC® | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Through Hole | 8-MDIP |
|
LM7131ACM5IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
31,000 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 150V/µs | 70 MHz | 90 MHz | 20 µA | 20 µV | 7mA | 65 mA | 2.7 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMV852MMIC CMOS 2 CIRCUIT 8VSSOP |
697 |
|
Datasheet | LMV® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 4.5V/µs | 8 MHz | - | 0.1 pA | 260 µV | 820µA (x2 Channels) | 65 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
LM6152BCMXIC OPAMP GP 2 CIRCUIT 8SOIC |
3,470 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 30V/µs | 80 MHz | - | 500 nA | 300 µV | 1.6mA (x2 Channels) | 16.9 mA | 2.7 V | 24 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LMC6042INIC CMOS 2 CIRCUIT 8DIP |
1,715 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
|
LMC6042AINIC CMOS 2 CIRCUIT 8DIP |
178 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
CLC5612IMIC BUFFER 2 CIRCUIT 8SOIC |
2,253 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 2 | - | 290V/µs | - | 75 MHz | 5 µA | 8 mV | 1.6mA (x2 Channels) | - | 14 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6619MAX/NOPBIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,049 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 57V/µs | 58 MHz | 140 MHz | 1.4 µA | 100 µV | 1.45mA (x2 Channels) | 35 mA | 2.7 V | 11 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMC6584BINIC CMOS 4 CIRCUIT 14DIP |
957 |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.2V/µs | 1.2 MHz | - | 20 pA | 500 µV | 3.2mA (x4 Channels) | 70 mA | 1.8 V | 10 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LM7171BIMX/NOPBLM7171 VERY HIGH SPEED, HIGH OUT |
53,992 |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
