Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CLC440AJPIC VOLTAGE FEEDBACK 1 CIRC 8MDIP |
2,738 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1500V/µs | 230 MHz | 260 MHz | 10 µA | 1 mV | 7mA | 80 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-MDIP |
|
CLC415AJPIC OPAMP CFA 4 CIRCUIT 14DIP |
5,503 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 4 | - | 1500V/µs | - | 160 MHz | 3 µA | 2 mV | 20mA (x4 Channels) | 60 mA | 7 V | 7 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
CLC415AJE-TR13IC OPAMP CFA 4 CIRCUIT 14SOIC |
3,501 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 4 | - | 1500V/µs | - | 160 MHz | 3 µA | 2 mV | 20mA (x4 Channels) | 60 mA | 7 V | 7 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
CLC428AJE-TR13IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
52,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 2 | - | 500V/µs | 135 MHz | 160 MHz | 1.5 µA | 1 mV | 11mA (x2 Channels) | 70 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6732MFIC OPAMP CFA 1 CIRCUIT SOT23-6 |
638 |
|
Datasheet | LMH® | SOT-23-6 | Bulk | Active | Current Feedback | 1 | - | 2700V/µs | - | 540 MHz | 2 µA | 3 mV | 9mA | 115 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LM6182AIMIC OPAMP CFA 1 CIRCUIT 16SOIC |
14,040 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 1.4V/µs | - | 100 MHz | 5 µA | 3 mV | 15mA | 100 mA | 7 V | 32 V | -55°C ~ 125°C (TJ) | - | - | Surface Mount | 16-SOIC |
|
|
CLC505AJEIC OPAMP CFA 1 CIRCUIT 8SOIC |
786 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 1700V/µs | - | 150 MHz | 10 µA | 2 mV | 9mA | 45 mA | - | - | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMC6462AMNIC CMOS 2 CIRCUIT 8MDIP |
528 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 50µA (x2 Channels) | 75 mA | 3 V | 15.5 V | -55°C ~ 125°C (TJ) | - | - | Through Hole | 8-MDIP |
|
LM7372MR-NSIC VOLTAGE FEEDBACK 2 CIRC 8SO |
2,882 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 3000V/µs | 120 MHz | 220 MHz | 2.7 µA | 2 mV | 13mA (x2 Channels) | 260 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
LM6142BIMXIC OPAMP GP 2 CIRCUIT 8SOIC |
2,059 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
