Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28474FAZIC INST AMP 4 CIRCUIT 24QSOP |
18,662 |
|
Datasheet | - | 24-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | Instrumentation | 4 | Rail-to-Rail | 0.5V/µs | 6 MHz | - | 10 pA | 35 µV | 240µA (x4 Channels) | 31 mA | 2.4 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 24-QSOP |
|
EL5211AIYEZ-T13IC OPAMP VFB 2 CIRCUIT 8HMSOP |
990 |
|
Datasheet | EL5211A | 8-VSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 75V/µs | 32 MHz | 60 MHz | 2 nA | 3 mV | 5mA (x2 Channels) | 65 mA | 4.5 V | 16.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-HMSOP |
|
HFA1135IBIC OPAMP CFA 1 CIRCUIT 8SOIC |
1,031 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 1200V/µs | 360 MHz | 360 MHz | 6 µA | 2 mV | 6.9mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL2276CSIC OPAMP CFA 2 CIRCUIT 14SOIC |
18,769 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 800V/µs | - | 70 MHz | 4 µA | 2.5 mV | 1mA (x2 Channels) | 55 mA | 3 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
HA3-2444-5IC OPAMP GP 4 CIRCUIT 16DIP |
2,460 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 120V/µs | 50 MHz | - | 9 µA | 4 mV | 20mA | 25 mA | 17 V | 34 V | 0°C ~ 75°C | - | - | Through Hole | 16-PDIP |
|
HFA1130IBIC OPAMP CFA 1 CIRCUIT 8SOIC |
2,120 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 2300V/µs | - | 850 MHz | 25 µA | 2 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ICL7612BCPAIC CMOS 1 CIRCUIT 8DIP |
744 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 5 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
ICL7621ACPAIC CMOS 2 CIRCUIT 8DIP |
1,896 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 2 mV | 1mA (x2 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ISL55291IUZIC OPAMP VFB 2 CIRCUIT 10MSOP |
23,725 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 260V/µs | 800 MHz | - | 12 µA | 170 µV | 12mA (x2 Channels) | 132 mA | 3 V | 5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 10-MSOP |
|
HFA1110IBIC BUFFER 1 CIRCUIT 8SOIC |
1,688 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 1 | - | 1300V/µs | - | 750 MHz | 10 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
