Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28208FBZ-T13IC OPAMP GP 2 CIRCUIT 8SOIC |
32,742 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.45V/µs | 1.2 MHz | - | 13 nA | 25 µV | 185µA (x2 Channels) | 30 mA | 3 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
EL5393ACSIC OPAMP CFA 3 CIRCUIT 16SOIC |
300 |
|
Datasheet | EL5393A | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 3 | - | 2200V/µs | - | 300 MHz | 1 µA | 1 mV | 4mA (x3 Channels) | 120 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
HFA1205IPIC OPAMP GP 2 CIRCUIT 8MSOP |
6,684 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 2400V/µs | - | 425 MHz | 6 µA | 2 mV | 5.8mA (x2 Channels) | 60 mA | - | - | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
HFA1115IPIC BUFFER 1 CIRCUIT 8SOIC |
36,135 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Buffer | 1 | - | 1660V/µs | - | 225 MHz | 1 µA | 2 mV | 6.9mA | 55 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ISL28278FAZ-T7IC OPAMP GP 2 CIRCUIT 16QSOP |
4,000 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 10 pA | 0.2 µV | 120µA (x2 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
|
ISL28486FAZ-T7IC OPAMP GP 4 CIRCUIT 16QSOP |
1,954 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.17V/µs | 400 kHz | - | 500 pA | 20 µV | 240µA | 31 mA | 2.4 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
ISL28278FAZ-TZIC OPAMP GP 2 CIRCUIT 16QSOP |
1,000 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 10 pA | 0.2 µV | 120µA (x2 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
EL5166ISIC OPAMP CFA 1 CIRCUIT 8SOIC |
47,791 |
|
Datasheet | EL5166 | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 6000V/µs | - | 1.4 GHz | - | 500 µV | 8.5mA | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
HA7-2515-5IC OPAMP GP 1 CIRCUIT 8CERDIP |
120 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 60V/µs | 12 MHz | - | 125 nA | 5 mV | 4mA | 20 mA | 40 V | 40 V | 0°C ~ 75°C | - | - | Through Hole | 8-CERDIP |
|
|
ISL28233IUZIC ZERO-DRIFT 2 CIRCUIT 8MSOP |
309 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Zero-Drift | 2 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 300 pA | 2 µV | 18µA (x2 Channels) | 17 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
