Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EL5308ISIC OPAMP GP 3 CIRCUIT 16SOIC |
448 |
|
Datasheet | EL5308 | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 3 | - | 4500V/µs | - | 450 MHz | 2 µA | 3 mV | 3.7mA (x3 Channels) | 135 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
EL2227CYZIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
659 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 50V/µs | 137 MHz | 115 MHz | 3.4 µA | 200 µV | 4.8mA (x2 Channels) | 180 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
HFA1145IPIC OPAMP CFA 1 CIRCUIT 8DIP |
1,970 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 1000V/µs | 330 MHz | - | - | - | 6.3mA | 60 mA | 9 V | 11 V | - | - | - | Through Hole | 8-PDIP |
|
EL8401IUZ-T7IC OPAMP GP 4 CIRCUIT 16QSOP |
21,000 |
|
Datasheet | EL8401 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 200V/µs | 100 MHz | 200 MHz | 1.6 µA | 800 µV | 2mA (x4 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
EL8401IUZIC OPAMP GP 4 CIRCUIT 16QSOP |
2,002 |
|
Datasheet | EL8401 | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 200V/µs | 100 MHz | 200 MHz | 1.6 µA | 800 µV | 2mA (x4 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
HFA1113IBIC BUFFER 1 CIRCUIT 8SOIC |
805 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 1 | - | 2400V/µs | - | 850 MHz | 25 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
HA7-5147-5IC OPAMP GP 1 CIRCUIT 8CERDIP |
1,613 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 35V/µs | 140 MHz | - | 15 nA | 30 µV | 3.5mA | 25 mA | 10 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
EL5375IUIC OPAMP DIFF 3 CIRCUIT 24QSOP |
13,920 |
|
Datasheet | EL5375 | 24-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 3 | - | 900V/µs | 200 MHz | 550 MHz | 12.5 µA | 3 mV | 9.6mA (x3 Channels) | 67 mA | 4.75 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 24-QSOP |
|
|
CA5260AM96IC OPAMP GP 2 CIRCUIT 8SOIC |
2,744 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 22 mA | 4.5 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
EL8401ISZ-T13IC OPAMP GP 4 CIRCUIT 14SOIC |
27,500 |
|
Datasheet | EL8401 | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 200V/µs | 100 MHz | 200 MHz | 1.6 µA | 800 µV | 2mA (x4 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
