Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HA9P5195-5IC OPAMP GP 1 CIRCUIT 14SOIC |
3,956 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 200V/µs | 150 MHz | - | 5 µA | 3 mV | 19mA | 30 mA | - | - | 0°C ~ 75°C | - | - | Surface Mount | 14-SOIC |
|
EL5127CYZIC BUFFER 4 CIRCUIT 10MSOP |
331 |
|
Datasheet | EL5127 | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Buffer | 4 | Rail-to-Rail | 2.2V/µs | - | 2.5 MHz | 2 nA | 1 mV | 750µA (x4 Channels) | 120 mA | 4.5 V | 16.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
HA3-2605-5IC OPAMP GP 1 CIRCUIT 8DIP |
3,595 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 7V/µs | 12 MHz | - | 5 nA | 3 mV | 3mA | 18 mA | 45 V | 45 V | 0°C ~ 75°C | - | - | Through Hole | 8-PDIP |
|
ISL28272FAZIC INST AMP 2 CIRCUIT 16QSOP |
1,950 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Instrumentation | 2 | Rail-to-Rail | 0.5V/µs | - | 100 kHz | 10 pA | 35 µV | 120µA | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
|
HFA1112IPIC BUFFER 1 CIRCUIT 8DIP |
170 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 2400V/µs | - | 850 MHz | 25 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
EL2141CSIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,585 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | Differential | 800V/µs | 400 MHz | 150 MHz | 6 µA | 10 mV | 11mA | 60 mA | 6 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL5364ISIC OPAMP CFA 3 CIRCUIT 16SOIC |
224 |
|
Datasheet | EL5364 | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 3 | - | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
HFA1120IBIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,947 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 2300V/µs | - | 670 MHz | 12 µA | 2 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
HA9P2444-5IC OPAMP GP 4 CIRCUIT 16SOIC |
2,156 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | General Purpose | 4 | - | 120V/µs | 50 MHz | - | 9 µA | 4 mV | 20mA | 25 mA | 17 V | 34 V | 0°C ~ 75°C | - | - | Surface Mount | 16-SOIC |
|
|
ISL28476FAZ-T7IC OPAMP GP 4 CIRCUIT 16QSOP |
21,009 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.13V/µs | 400 kHz | - | 500 pA | 20 µV | 55µA (x4 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
