Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28158FHZ-T7ARAIL-TO-RAIL INPUT-OUTPUT (RRIO) |
8,902 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 200 kHz | 420 kHz | 1 pA | 5 µV | 34µA | 30 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-SOT |
|
ISL28138FHZ-T7AIC OPAMP GP 1 CIRCUIT 6SOT |
16,250 |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 4.8V/µs | 4.5 MHz | 13 MHz | 1 pA | 6 µV | 900µA | 75 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-SOT |
|
EL2280CSIC OPAMP CFA 2 CIRCUIT 8SOIC |
5,097 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 1200V/µs | - | 250 MHz | 1.5 µA | 2.5 mV | 3mA (x2 Channels) | 55 mA | 6 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
HA3-2406-5IC OPAMP GP 4 CIRCUIT 16DIP |
1,150 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 20V/µs | 30 MHz | - | 50 nA | 7 mV | 4.8mA | 15 mA | 45 V | 45 V | 0°C ~ 75°C | - | - | Through Hole | 16-PDIP |
|
EL5100ISZIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
75,992 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 2200V/µs | - | 200 MHz | 2 µA | 1 mV | 2.5mA | 100 mA | 3.3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL8103IW-T7AIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,000 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA | 65 mA | 3 V | 5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
ISL55290IUZIC OPAMP VFB 2 CIRCUIT 10MSOP |
59,559 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 268V/µs | 800 MHz | - | 25 µA | 300 µV | 30mA (x2 Channels) | 130 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
ISL28268FUZIC OPAMP GP 2 CIRCUIT 8MSOP |
14,603 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 200 kHz | 420 kHz | 10 pA | 90 µV | 34µA (x2 Channels) | 30 mA | 2.4 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MSOP |
|
|
ISL28268FBZIC OPAMP GP 2 CIRCUIT 8SOIC |
11,121 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 200 kHz | 420 kHz | 10 pA | 90 µV | 34µA (x2 Channels) | 30 mA | 2.4 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
EL5251IYIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
2,014 |
|
Datasheet | EL5251 | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 100V/µs | 40 MHz | 200 MHz | 20 nA | 500 µV | 1.35mA (x2 Channels) | 70 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
