Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
GLF763212A POWER DEEP SLEEP SWITCH |
1,810 |
|
Datasheet | 6-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | - | P-Channel | - | - | 1.5V ~ 5.5V | 2A | 31mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
|
GLF40206.5 V POWER MUX |
990 |
|
Datasheet | SOT-23-6 | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | - | - | - | - | 2.5V ~ 6.5V | 2A | 92mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-6 |
|
GLF725102A ULTRA LOW CURRENT N-CH ROAD S |
2,950 |
|
Datasheet | 4-UFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | High Side | P-Channel | - | - | 0.8V ~ 3.6V | 2A | 27mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
GLF15114 A Wide Input Voltage NMOS Load |
5,880 |
|
Datasheet | 6-UFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.7V ~ 5.5V | Not Required | 4A | 13mOhm | Non-Inverting | Load Discharge, Status Flag | Reverse Current | -40°C ~ 105°C | - | - | Surface Mount | 6-WLCSP (0.97x1.47) |
|
GLF713214A NANO POWER LOAD SWITCH |
12,000 |
|
Datasheet | 6-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | High Side | P-Channel | - | - | 1.1V ~ 5.5V | 4A | 15mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
|
|
GLF1401-D3G7Dual Channel, IQSmartTM Load Swi |
3,410 |
|
Datasheet | 14-PowerWFDFN | - | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 0.6V ~ 5.5V | 2.5V ~ 5.5V | 6A, 6A | 19mOhm | Non-Inverting | Slew Rate Controlled | Over Temperature | -40°C ~ 85°C | - | - | Surface Mount | 14-DFN (3x2) |
|
GLF2321B-T1G71.8A CURRENT LIMIT POWER SWITCH |
1,952 |
|
Datasheet | SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | On/Off | 2.5V ~ 5.5V | Not Required | 1.8A | 56mOhm | - | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Over Temperature, Reverse Current, Short Circuit, UVLO | - | - | - | Surface Mount | SOT-23-5 |
|
GLF76311NANO CURRENT CONSUMED POWER ON/O |
2,940 |
|
Datasheet | 4-XFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | - | P-Channel | - | - | 2.5V ~ 5.5V | 2A | 34mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
|
GLF741394.5 A Power Mux Switch with True |
3,413 |
|
Datasheet | 12-UFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 2:1 | High Side | P-Channel | - | 2V ~ 5.5V | Not Required | 4.5A | 20mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | 12-WLCSP (1.27x1.67) |
|
GLF765212A POWER DEEP SLEEP SWITCH |
2,870 |
|
Datasheet | 6-UFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | - | P-Channel | - | - | 1.8V ~ 5.5V | 2A | 31mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
