Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
GLF721103A Nano Current Pwr Load Switch |
2,764 |
|
Datasheet | 4-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | High Side | P-Channel | - | - | 1.5V ~ 5.5V | 3A | 29mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
GLF81311NANO-CURRENT CONSUMED POWER SWIT |
2,990 |
|
Datasheet | SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | - | 2V ~ 6.5V | Not Required | 3A | 41mOhm | - | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
GLF1411-D1G7Dual Channel, IQSmartTM Load Swi |
5,800 |
|
Datasheet | 8-XFDFN Exposed Pad | IQSmart™ | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | P-Channel | - | 1.5V ~ 5.5V | Not Required | 1A, 1A | 180mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-DFN (1.5x1.5) |
|
|
GLF71511NANO-CURRENT CONSUMED LOAD SWITC |
300 |
|
Datasheet | 4-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | High Side | P-Channel | - | - | 1.1V ~ 5.5V | 2A | 25mOhm | - | - | - | -40°C ~ 105°C | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
GLF745202A POWER MUX WITH VIN SELECTION |
16,281 |
|
Datasheet | 6-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | - | P-Channel | - | - | 1.5V ~ 5.5V | 2A | 35mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
|
GLF40012A Low Current Consump Pwr Mux |
8,900 |
|
Datasheet | SOT-23-6 | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | - | - | - | - | 1.5V ~ 5.5V | 2A | 68mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
GLF761212A POWER RESET SWITCH |
500 |
|
Datasheet | 6-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | - | P-Channel | - | - | 2.5V ~ 5.5V | 2A | 34mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
|
|
GLF40285.5V Power Mux |
6,400 |
|
Datasheet | SOT-23-6 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 2:1 | High Side | P-Channel | On/Off | 2.5V ~ 5.5V | Not Required | 2A | 97mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-6 |
|
GLF71310NANO-CURRENT CONSUMED PWR SWITCH |
5,905 |
|
Datasheet | 4-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | High Side | - | - | - | 1.1V ~ 5.5V | 2A | 31mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
GLF71301TNANO-CURRENT CONSUMED PWR SWITCH |
3,680 |
|
Datasheet | 4-XFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | High Side | - | - | - | 1.1V ~ 5.5V | 1.5A | 34mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 4-WLCSP (0.77x0.77) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
