Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
GLF72112Load Switch with TRCB & fast ris |
2,940 |
|
Datasheet | 4-UFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | - | 1.5V ~ 5.5V | Not Required | 3A | 29mOhm | - | Slew Rate Controlled | Reverse Current | - | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
GLF2310A-T1G72.1A CURRENT LIMIT POWER SWITCH |
14,895 |
|
Datasheet | SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | - | - | - | 2.5V ~ 5.5V | Not Required | 2.1A | 50mOhm | - | Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, Reverse Current, Short Circuit, UVLO | - | - | - | Surface Mount | SOT-23-5 |
|
GLF2310A-T2G72.1A CURRENT LIMIT POWER SWITCH |
2,960 |
|
Datasheet | SOT-23-6 | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | - | - | - | 2.5V ~ 5.5V | Not Required | 2.1A | 50mOhm | - | Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, Reverse Current, Short Circuit, UVLO | - | - | - | Surface Mount | SOT-23-6 |
|
GLF2311A-T2G72.1A CURRENT LIMIT POWER SWITCH |
1,000 |
|
Datasheet | SOT-23-6 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | On/Off | 2.5V ~ 5.5V | Not Required | 2.1A | 56mOhm | - | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Over Temperature, Reverse Current, Short Circuit, UVLO | - | - | - | Surface Mount | SOT-23-6 |
|
|
GLF2311A-T1G72.1A CURRENT LIMIT POWER SWITCH |
500 |
|
Datasheet | SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | - | - | - | 2.5V ~ 5.5V | Not Required | 2.1A | 50mOhm | - | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, Reverse Current, Short Circuit, UVLO | - | - | - | Surface Mount | SOT-23-5 |
|
|
GLF1200QLoad Switch with True Reverse Cu |
500 |
|
Datasheet | SC-74A, SOT-753 | IQSmart™ | Tape & Reel (TR) | Active | Load Switch | - | - | - | P-Channel | - | - | 1.5V ~ 5.5V | 2A | 60mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
GLF721224A SLEW RATE CONTROLLED LOAD SWI |
3,000 |
|
Datasheet | 6-UFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | - | 1.5V ~ 5.5V | Not Required | 4A | 14mOhm | - | Slew Rate Controlled | Reverse Current | - | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
|
GLF71315NANO-CURRENT CONSUMED PWR SWITCH |
2,850 |
|
Datasheet | 4-UFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | High Side | - | - | - | 1.1V ~ 5.5V | 2A | 31mOhm | - | - | - | -40°C ~ 105°C | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
|
GLF741384.5 A Power Mux Switch without T |
2,990 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF71311TNANO-CURRENT CONSUMED PWR SWITCH |
3,000 |
|
Datasheet | 4-XFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | High Side | - | - | - | 1.1V ~ 5.5V | 2A | 31mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 4-WLCSP (0.77x0.77) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
