Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4140IDGKRIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
3,311 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 450V/µs | 205 MHz | 160 MHz | 5.1 µA | 1 mV | 13.2mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
OPA4340UAG4IC CMOS 4 CIRCUIT 14SOIC |
4,718 |
|
Datasheet | microPOWER™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA2241PAG4IC OPAMP GP 2 CIRCUIT 8DIP |
1,437 |
|
Datasheet | microPOWER™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 4 nA | 50 µV | 25µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2604AU/2K5IC OPAMP GP 2 CIRCUIT 8SOIC |
4,031 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Differential | 25V/µs | 20 MHz | - | 100 pA | 1 mV | 10.5mA (x2 Channels) | 35 mA | 9 V | 48 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLE2024CDWIC OPAMP GP 4 CIRCUIT 16SOIC |
2,281 |
|
Datasheet | Excalibur™ | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 2.8 MHz | - | 45 nA | 1 mV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
TLE2024CDWG4IC OPAMP GP 4 CIRCUIT 16SOIC |
2,317 |
|
Datasheet | Excalibur™ | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 2.8 MHz | - | 45 nA | 1 mV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
THS4130IDGKRIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
3,744 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
THS4130IDRIC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,768 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4130IDRG4IC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,608 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6503MTX/NOPBIC VARIABLE GAIN 1 CIRC 14TSSOP |
2,760 |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
