Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4532IPWRIC OPAMP DIFF 2 CIRCUIT 16TSSOP |
3,609 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Differential | 2 | Differential, Rail-to-Rail | 390V/µs | 27 MHz | 36 MHz | 200 nA | 80 µV | 250µA (x2 Channels) | 25 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-TSSOP |
|
LM6144BINIC OPAMP GP 4 CIRCUIT 14DIP |
1,058 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 14-PDIP |
|
|
TLE2064ACNG4IC OPAMP JFET 4 CIRCUIT 14DIP |
4,831 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 14-PDIP |
|
INA253A2IPWIC CURR SENSE 1 CIRCUIT 20TSSOP |
3,192 |
|
Datasheet | Zero-Drift | 20-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Current Sense | 1 | - | 2.4V/µs | - | 350 kHz | 90 pA | - | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
|
OPA2835TDA1IC VOLTAGE FEEDBACK 2 CIRC DIE |
1,038 |
|
Datasheet | - | Die | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 160V/µs | 56 MHz | - | 400 nA | 500 µV | 250µA (x2 Channels) | 40 mA | - | - | - | - | - | Surface Mount | Die |
|
|
TLC254CNG4IC CMOS 4 CIRCUIT 14DIP |
1,469 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | CMOS | 4 | Open Drain | 4.5V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLE2074ACNE4QUAD, 38-V, 10-MHZ, 40-V/S SLEW |
3,235 |
|
Datasheet | Excalibur™ | 14-DIP (0.300", 7.62mm) | Tube | Active | Standard | 4 | Push-Pull | 45V/µs | 10 MHz | - | 1 pA | 250 µV | 6.5mA | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 14-PDIP |
|
LM7171BIM/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,355 |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA1644AIDRIC AUDIO 4 CIRCUIT 14SOIC |
2,849 |
|
Datasheet | SoundPlus™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Audio | 4 | Rail-to-Rail | 20V/µs | 11 MHz | - | 2 pA | 1 mV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LMC6082AIMIC CMOS 2 CIRCUIT 8SOIC |
1,097 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 1.1mA (x2 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
