Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2694IDG4IC OPAMP CFA 2 CIRCUIT 8SOIC |
3,939 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | Differential | 1700V/µs | 690 MHz | 1.5 GHz | 5 µA | 700 µV | 11.6mA (x2 Channels) | 70 mA | 7 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4131IDGKRIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
3,405 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
THS4131IDRIC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,210 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA3684IDRG4IC OPAMP CFA 3 CIRCUIT 14SOIC |
4,385 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Current Feedback | 3 | - | 780V/µs | 1.9 GHz | 250 MHz | 5 µA | 1.5 mV | 1.7mA | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ICL7652PIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
3,320 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | - | 3.1V/µs | 1.9 MHz | - | 4 pA | 600 µV | 1.5mA | - | 3.8 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
THS6302IRHFRIC SOC PROCESSOR |
2,032 |
|
Datasheet | - | 28-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 4 | - | 7400V/µs | - | 320 MHz | - | - | 39mA (x4 Channels) | 40 mA | 11.4 V | 12.6 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-VQFN (5x4) |
|
|
INA129UA/2K5G4IC INST AMP 1 CIRCUIT 8SOIC |
1,335 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
INA105KU/2K5G4IC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,907 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA1633DGNRIC DIFFERENTIAL 1 CIRCUIT 8TSSOP |
4,789 |
|
Datasheet | - | 8-PowerTSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Differential | 80V/µs | 200 MHz | 200 MHz | 6.8 µA | 200 µV | 11mA | 85 mA | 4 V | 35 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-HVSSOP |
|
|
OPA1633DRIC DIFFERENTIAL 1 CIRCUIT 8SOIC |
4,223 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Differential | 80V/µs | 200 MHz | 200 MHz | 6.8 µA | 200 µV | 11mA | 85 mA | 4 V | 35 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
