Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9321604QHAIC OPAMP GP 2 CIRCUIT 10CFP |
2,239 |
|
Datasheet | Excalibur™ | 10-CDFF | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 275 µV | 6.9mA (x4 Channels) | 50 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
5962-9460203QCAIC OPAMP JFET 4 CIRCUIT 14CDIP |
2,931 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 3.1mA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
|
TLE2074MJBIC OPAMP JFET 4 CIRCUIT 14CDIP |
4,057 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 3.1mA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
5962-9760301Q2AIC OPAMP GP 2 CIRCUIT 20LCCC |
4,734 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 80 nA | 1 mV | 3.4mA (x2 Channels) | 25 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TLC2202MFKBIC CMOS 2 CIRCUIT 20LCCC |
4,980 |
|
Datasheet | - | 20-CLCC | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.9V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-0051203QHAIC OPAMP GP 1 CIRCUIT 10CFP |
3,199 |
|
Datasheet | - | 10-CDFF | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
5962-9089504QPAIC OPAMP ZER-DRIFT 1CIRC 8CDIP |
3,473 |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Chopper (Zero-Drift) | 1 | - | 3.7V/µs | 1.9 MHz | - | 50 pA | 4 µV | 1.5mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
TLC2274MFKBIC OPAMP GP 4 CIRCUIT 20LCCC |
2,787 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-9550403QHAIC CMOS 2 CIRCUIT 10CFP |
4,563 |
|
Datasheet | LinCMOS™ | 10-CDFF | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 400µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
|
TLC2274AMJBIC OPAMP GP 4 CIRCUIT 14CDIP |
1,096 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
