Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4032CDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,517 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 2 | - | 100V/µs | 120 MHz | 100 MHz | 3 µA | 500 µV | 8.5mA (x2 Channels) | 90 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
VCA2614Y/2KIC VARIABLE GAIN 2 CIRC 32TQFP |
1,186 |
|
Datasheet | - | 32-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | Differential | 300V/µs | 100 MHz | 40 MHz | 1 nA | - | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 32-TQFP (5x5) |
|
THS4131CDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
3,880 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
|
THS4131CDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
797 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC2652MLBIC OPAMP ZER-DRIFT 1CIRC TO99-8 |
582 |
|
Datasheet | LinCMOS™ | TO-99-8 Metal Can | Bulk | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
OPA4140AIDRIC OPAMP JFET 4 CIRCUIT 14SOIC |
158 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 11 MHz | - | 0.5 pA | 30 µV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
LM108AFKBIC OPAMP GP 1 CIRCUIT 14CDIP |
178 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | - | - | - | 3 nA | - | - | - | 40 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
ONET2501PARGTRIC LIMITING 1 CIRCUIT 16VQFN |
4,760 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | 45 kHz | - | - | 32mA | 25 mA | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
THS4131IDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
248 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TL052MFKBIC OPAMP JFET 2 CIRCUIT 20LCCC |
156 |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | J-FET | 2 | - | 20.7V/µs | 3.3 MHz | - | 30 pA | 650 µV | 4.8mA (x2 Channels) | 80 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
