Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4150CDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
1,116 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Differential | 1 | Differential | 650V/µs | 340 MHz | 150 MHz | 4.3 µA | 1.1 mV | 17.5mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4032IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
4,166 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 2 | - | 100V/µs | 120 MHz | 100 MHz | 3 µA | 500 µV | 8.5mA (x2 Channels) | 90 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
TLE2062MJGIC OPAMP JFET 2 CIRCUIT 8CDIP |
758 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
OPA4704EA/250IC CMOS 4 CIRCUIT 14TSSOP |
2,396 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 3V/µs | 3 MHz | - | 1 pA | 160 µV | 160µA (x4 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
VCA2618YTIC VARIABLE GAIN 2 CIRC 32TQFP |
2,934 |
|
Datasheet | - | 32-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | Differential | 300V/µs | 100 MHz | 30 MHz | 1 nA | - | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 32-TQFP (5x5) |
|
|
VCA2619YTIC VARIABLE GAIN 2 CIRC 32TQFP |
4,634 |
|
Datasheet | - | 32-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | Differential | 300V/µs | 100 MHz | 20 MHz | 1 nA | 50 mV | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 32-TQFP (5x5) |
|
INA2128PIC OPAMP INSTR 1.3MHZ DUAL 16DIP |
309 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 2 | - | 4V/µs | 200 kHz | 1.3 MHz | 2 nA | 25 µV | 1.4mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
|
THS4150IDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
2,318 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Differential | 1 | Differential | 650V/µs | 340 MHz | 150 MHz | 4.3 µA | 1.1 mV | 17.5mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
THS7002IPWPRIC OPAMP PGA 2 CIRCUIT 28HTSSOP |
4,691 |
|
Datasheet | - | 28-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Programmable Gain | 2 | - | 85V/µs | 70 MHz | 100 MHz | 2.5 µA | 1 mV | 5mA | 95 mA | 9 V | 32 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-HTSSOP |
|
THS4304DGKIC OPAMP VFB 1 CIRCUIT 8VSSOP |
3,501 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 830V/µs | 870 MHz | 3 GHz | 7 µA | 500 µV | 18mA | 140 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
