Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PGA870IRHDRIC OPAMP PGA 1 CIRCUIT 28VQFN |
3,722 |
|
Datasheet | - | 28-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Programmable Gain | 1 | - | 2900V/µs | - | 650 MHz | - | - | 143mA | 50 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 28-VQFN (5x5) |
|
THS4502CDGNG4IC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
3,842 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Discontinued at Digi-Key | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 1 mV | 23mA | - | 4.5 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4031CDGNIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
230 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 1 | - | 100V/µs | - | 100 MHz | 3 µA | 500 µV | 8.5mA | 90 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
INA106U/2K5IC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,328 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC277MLBIC CMOS 2 CIRCUIT TO99-8 |
1,098 |
|
Datasheet | LinCMOS™ | TO-99-8 Metal Can | Bulk | Active | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 250 µV | 1.9mA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
TLC27M7MJGBIC CMOS 2 CIRCUIT 8CDIP |
124 |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 190 mV | 285µA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
THS4502IDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,894 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 1 mV | 23mA | 120 mA | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LOG102AIDRIC LOG/LOG 1 CIRCUIT 14SOIC |
4,441 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Logarithmic and Log Ratio | 1 | - | 0.5V/µs | 1.4 MHz | 45 kHz | 5 pA | 300 µV | 1.25mA | - | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
OPA2132PIC OPAMP JFET 2 CIRCUIT 8DIP |
1,289 |
|
Datasheet | OPAx132 | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
LM6144BIM/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
132 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
