Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6624MFIC OPAMP VFB 1 CIRCUIT SOT23-5 |
1,273 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
ONET2501PARGTTIC LIMITING 1 CIRCUIT 16VQFN |
4,000 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Bulk | Discontinued at Digi-Key | Limiting | 1 | Differential | - | - | 45 kHz | - | - | 32mA | 25 mA | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
TL052MLBIC OPAMP JFET 2 CIRCUIT TO99-8 |
1,127 |
|
Datasheet | LinCMOS™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
OPA4241PAIC OPAMP GP 4 CIRCUIT 14DIP |
3,229 |
|
Datasheet | microPOWER™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 4 nA | 50 µV | 25µA (x4 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
TLC2654MLBIC OPAMP ZER-DRIFT 1CIRC TO99-8 |
912 |
|
Datasheet | LinCMOS™ | TO-99-8 Metal Can | Bulk | Active | Chopper (Zero-Drift) | 1 | - | 2.9V/µs | 1.9 MHz | - | 50 pA | 5 mV | 1.5mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | TO-99-8 |
|
TLC2201MLBOPERATIONAL AMPLIFIER |
702 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
THS4150IDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
4,020 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Differential | 1 | Differential | 650V/µs | 340 MHz | 150 MHz | 4.3 µA | 1.1 mV | 17.5mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
OPA4684IDRIC OPAMP CFA 4 CIRCUIT 14SOIC |
1,597 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 4 | - | 780V/µs | 1.9 GHz | 95 MHz | 5 µA | 1.5 mV | 1.7mA (x4 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS4500CDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
11,296 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 4 mV | 23mA | - | 4.5 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
OPA4684IPWTIC OPAMP CFA 4 CIRCUIT 14TSSOP |
2,924 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Feedback | 4 | - | 780V/µs | 120 MHz | 95 MHz | 5 µA | 1.5 mV | 1.7mA (x4 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
