Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4140CDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
1,517 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Differential | 1 | Differential | 450V/µs | 205 MHz | 160 MHz | 5.1 µA | 1 mV | 13.2mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
|
THS4021IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,567 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 470V/µs | - | 350 MHz | 3 µA | 500 µV | 7.8mA | - | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4141CDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
4,285 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Differential | 1 | Differential | 450V/µs | 205 MHz | 160 MHz | 5.1 µA | 1 mV | 13.2mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
|
THS4511RGTRIC OPAMP DIFF 1 CIRCUIT 16VQFN |
1,724 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 4900V/µs | 2 GHz | 1.6 GHz | 8 µA | 1 mV | 39.2mA | - | 3.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
TLC27M2AMJGBIC CMOS 2 CIRCUIT 8CDIP |
1,214 |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 900 µV | 285µA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
TLC27M2AMJGIC CMOS 2 CIRCUIT 8CDIP |
180 |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 900 µV | 285µA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
TLC252CPWRIC CMOS 2 CIRCUIT 8TSSOP |
3,663 |
|
Datasheet | LinCMOS™ | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 2 | - | 2.9V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 1.9mA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
OPA4658PIC OPAMP CFB QUAD LOW PWR 14DIP |
4,680 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 4 | - | 1700V/µs | 900 MHz | - | 1.1 µA | 1.5 mV | 19mA (x4 Channels) | 60 mA | 9 V | 22 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA4228UA/2K5IC OPAMP GP 4 CIRCUIT 14SOIC |
2,628 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 11V/µs | 33 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -55°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
TLE2062MLBIC OPAMP JFET 2 CIRCUIT TO99-8 |
807 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
