Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA660APIC OPAMP TRANSCOND 1 CIRC 8DIP |
3,192 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Transconductance | 1 | - | 3000V/µs | - | 850 MHz | 2.1 µA | 10 mV | 26mA | 15 mA | 9 V | 11 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2134PAG4IC AUDIO 2 CIRCUIT 8DIP |
197 |
|
Datasheet | SoundPlus™ | 8-DIP (0.300", 7.62mm) | Tube | Active | Audio | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x2 Channels) | 35 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS4042IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,282 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM6171BIM/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
697 |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM3080NIC OP TRANSCONDUCTIVE AMP 8DIP |
44,967 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | Transconductance | 1 | Push-Pull | 50V/µs | - | - | 400 nA | 400 µV | 1.1mA | 650 µA | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-MDIP |
|
OPA4243EA/2K5IC OPAMP GP 4 CIRCUIT 14TSSOP |
3,140 |
|
Datasheet | microPOWER™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.1V/µs | 430 kHz | - | 10 nA | 2 mV | 45µA (x4 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
THS4120CDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
119 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
THS4012CDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
4,482 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4012IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
3,601 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS3062DRIC OPAMP CFA 2 CIRCUIT 8SOIC |
3,560 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 7000V/µs | 2.2 GHz | 300 MHz | 6 µA | 700 µV | 8.3mA | 145 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
