Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VCA820IDIC VARIABLE GAIN 1 CIRC 14SOIC |
3,351 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Variable Gain | 1 | - | 1700V/µs | - | 168 MHz | 19 µA | 4 mV | 34mA | 160 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMH6502MAIC VARIABLE GAIN 1 CIRC 14SOIC |
2,458 |
|
Datasheet | LMH® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Variable Gain | 1 | - | 1800V/µs | - | 130 MHz | 9 µA | - | 27mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
TL031MLBIC OPAMP JFET 1 CIRCUIT TO99-8 |
1,170 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 2V/µs | 1.1 MHz | - | 2 pA | 500 µV | 217µA | 40 mA | 10 V | 30 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
LMC6064IM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
1,943 |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 80µA (x4 Channels) | 26 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
THS4042CDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,922 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA (x2 Channels) | 100 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
INA131AP-1IC INST AMP 1 CIRCUIT 8DIP |
1,277 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 0.7V/µs | - | 70 kHz | 500 pA | 25 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA2674I-14DIC OPAMP CFA 2 CIRCUIT 14SOIC |
293 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 2000V/µs | 250 MHz | 260 MHz | 10 µA | 1 mV | 18mA (x2 Channels) | 500 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS7002CPWPRIC OPAMP PGA 2 CIRCUIT 28HTSSOP |
4,617 |
|
Datasheet | - | 28-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Programmable Gain | 2 | - | 175V/µs | 70 MHz | 100 MHz | 2.5 µA | 1 mV | 5mA | 95 mA | 9 V | 32 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 28-HTSSOP |
|
|
TL072MLBIC OPAMP JFET 2 CIRCUIT TO99-8 |
2,504 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 65 pA | 3 mV | 1.4mA (x2 Channels) | - | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
|
TL062MLBIC OPAMP JFET 2 CIRCUIT TO99-8 |
741 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | - | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
