Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4120IDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
1,078 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2475AINIC CMOS 4 CIRCUIT 16DIP |
9,701 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
|
LT1012CDIC OPAMP GP 1 CIRCUIT 8SOIC |
131 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | - | - | 40 pA | 25 µV | 380µA | - | 40 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLE2024AINIC OPAMP GP 4 CIRCUIT 14DIP |
4,126 |
|
Datasheet | Excalibur™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 4 | - | 0.7V/µs | 2.8 MHz | - | 45 nA | 750 µV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
TLC2810ZPIC OPAMP GP 2 CIRCUIT 8DIP |
4,515 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 3.6V/µs | 1.7 MHz | - | 7 pA | 1.8 mV | 1mA (x2 Channels) | - | 4 V | 16 V | -40°C ~ 150°C (TA) | - | - | Through Hole | 8-PDIP |
|
TLE2064ACDRIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,602 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
THS4120CDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
1,302 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLC252CPIC CMOS 2 CIRCUIT 8DIP |
3,048 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 2.9V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 1.9mA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
OPA3690IDBQRIC OPAMP VFB 3 CIRCUIT 16SSOP |
3,619 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 3 | Differential | 1800V/µs | 300 MHz | 500 MHz | 5 µA | 1 mV | 16.5mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
OPA3690IDRIC OPAMP VFB 3 CIRCUIT 16SOIC |
4,526 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 3 | Differential | 1800V/µs | 300 MHz | 500 MHz | 5 µA | 1 mV | 16.5mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
