Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2061MLBIC OPAMP JFET 1 CIRCUIT TO99-8 |
493 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
THS4062CDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,947 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLV2434IPWIC CMOS 4 CIRCUIT 14TSSOP |
3,462 |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x4 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TLV2434IDIC CMOS 4 CIRCUIT 14SOIC |
118 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x4 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
OPA4650PIC OPAMP VFB 160MHZ QUAD 14DIP |
869 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 4 | - | 240V/µs | 360 MHz | - | 5 µA | 1 mV | 23mA | 75 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA687UIC OPAMP VFB 3.8GHZ SGL 8SOIC |
5,093 |
|
Datasheet | SpeedPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 900V/µs | 3.8 GHz | - | 20 µA | 100 µV | 18.5mA | 80 mA | 10 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4061CDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,872 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA | 115 mA | 9 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA1612AIDRGROPA1612 - SOUNDPLUS AUDIO OPERAT |
3,436,497 |
|
Datasheet | SoundPlus™ | 8-WFDFN Exposed Pad | Bulk | Active | Audio | 2 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 100 µV | 3.6mA (x2 Channels) | 62 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
|
THS4041IDRQ1IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,151 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA | 100 mA | 9 V | 32 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
THS4121IDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,755 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
