Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC25M4BCNIC CMOS 4 CIRCUIT 14DIP |
4,330 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Open Drain | 0.6V/µs | 1.7 MHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
SM72501MF/NOPBIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,155 |
|
Datasheet | SolarMagic™ | SC-74A, SOT-753 | Tape & Reel (TR) | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 1.1V/µs | 2.5 MHz | - | 0.2 pA | 37 µV | 790µA | 86 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
TLC254BCNE4IC OPAMP GP 2.2MHZ 14DIP |
148 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 4 | Open Drain | 4.5V/µs | 2.2 MHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
INA141PAIC OPAMP INSTR 1MHZ SGL 8DIP |
25,374 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 4V/µs | - | 1 MHz | 2 nA | 20 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1001ACPIC OPAMP GP 1 CIRCUIT 8DIP |
601 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.25V/µs | 800 kHz | - | 500 pA | 10 µV | - | - | 8 V | 44 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
THS4215DIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,946 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4211DRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,352 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | - | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
VCA824IDRIC VARIABLE GAIN 1 CIRC 14SOIC |
3,923 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Variable Gain | 1 | - | 2500V/µs | - | 710 MHz | 19 µA | 4 mV | 36.5mA | 90 mA | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS4215DGKIC OPAMP VFB 1 CIRCUIT 8VSSOP |
4,557 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLC2202IDIC CMOS 2 CIRCUIT 14SOIC |
2,041 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
