Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OA2ZHA34SIC OPAMP ZER-DRIFT 2CIRC 8MINISO |
5,858 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | Rail-to-Rail | 0.19V/µs | 400 kHz | - | 70 pA | 1 µV | 31µA (x2 Channels) | 18 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TSV794IYPTTSSOP 14 BODY 4.4 PITCH 0.65 |
2,491 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Rail-to-Rail | 30V/µs | 50 MHz | - | 1 pA | 200 µV | 5.5mA (x4 Channels) | 70 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
|
TSV774IQ5THIGH BANDWIDTH (20 MHZ) LOW OFFS |
2,245 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 13V/µs | 20 MHz | - | 1 pA | 200 µV | 1.9mA (x4 Channels) | 65 mA | 2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount, Wettable Flank | 16-QFN (3x3) |
|
|
TSC2021IYSTHE AMPLIFIERS |
2,500 |
|
Datasheet | TSC2021 | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 2.8V/µs | - | 700 kHz | 200 µA | 400 µV | 1.8mA | 14.5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-MiniSO |
|
|
TSC2020IYDTSO 08 .15 JEDEC |
2,495 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 2V/µs | - | 700 kHz | 200 µA | 400 µV | 1.8mA | 14.5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
TSC2020IYSTMSOP/TSSOP 8 BODY3.00 PITCH0.65 |
2,490 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 2V/µs | - | 700 kHz | 200 µA | 400 µV | 1.8mA | 14.5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-MiniSO |
|
|
TSZ181H1YLTAUTOMOTIVE-GRADE, VERY HIGH ACCU |
2,603 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Single Ended, Rail-to-Rail | 4.7V/µs | 3 MHz | - | 30 pA | 1 µV | 800µA | 29 mA | 2.2 V | 5.5 V | -40°C ~ 175°C | - | - | Surface Mount | SOT-23-5 |
|
|
TSV774IYQ5THIGH BANDWIDTH (20 MHZ) LOW OFFS |
4,000 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 13V/µs | 20 MHz | - | 1 pA | 200 µV | 1.9mA (x4 Channels) | 65 mA | 2 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | 16-QFN (3x3) |
|
LM258AYPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,142 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1.1 MHz | - | 20 nA | 1 mV | 700µA (x2 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
LM258YDTIC OPAMP GP 2 CIRCUIT 8SOIC |
8,131 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1.1 MHz | - | 20 nA | 5 mV | 700µA (x2 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
