Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSZ151IYLTSOT 23-5 |
3,000 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Single Ended, Rail-to-Rail | 0.8V/µs | 1.6 MHz | - | 50 pA | 1 µV | 210µA | 30 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
TS1852ISTIC OPAMP GP 2 CIRCUIT 8MINISO |
3,100 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.25V/µs | 630 kHz | - | 16 nA | 1 mV | 162µA | 48 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TSX632AISTIC CMOS 2 CIRCUIT 8MINISO |
3,665 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 700 µV | 45µA | 92 mA | 3.3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TSV994IYDTIC OPAMP GP 4 CIRCUIT 14SO |
2,395 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 10V/µs | 20 MHz | - | 1 pA | 100 µV | 820µA (x4 Channels) | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
|
TSV914IYDTIC OPAMP GP 4 CIRCUIT 14SO |
1,113 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 4.5V/µs | 8 MHz | - | 1 pA | 4.5 mV | 780µA (x4 Channels) | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
TS952IYDTIC OPAMP GP 2 CIRCUIT 8SOIC |
2,480 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA (x2 Channels) | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
TSV782IYDTHIGH BANDWIDTH (30MHZ) LOW OFFSE |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 20V/µs | 30 MHz | - | 2 pA | 50 µV | 3.3mA | 70 mA | 2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
TSV782IYSTHIGH BANDWIDTH (30MHZ) LOW OFFSE |
1,990 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 20V/µs | 30 MHz | - | 2 pA | 50 µV | 3.3mA | 70 mA | 2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TSX7191AIYLTIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,000 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.5V/µs | 9 MHz | - | 1 pA | 450 µV | 660µA | - | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
|
LMV824AIYPTIC OPAMP GP 4 CIRCUIT 14TSSOP |
2,500 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1.9V/µs | 5.5 MHz | - | 60 nA | 800 µV | 300µA (x4 Channels) | 70 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
