Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSC202IDTSO 08 .15 JEDEC |
2,490 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 7V/µs | - | 300 kHz | 5 pA | 100 µV | 840µA | - | 2.7 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
TSC201IDTSO 08 .15 JEDEC |
2,486 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 7V/µs | - | 400 kHz | 5 pA | 100 µV | 840µA | - | 2.7 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
TSC202ISTMSOP/TSSOP 8 BODY3.00 PITCH0.65 |
1,980 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 7V/µs | - | 300 kHz | 5 pA | 100 µV | 840µA | - | 2.7 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TS982IDWTIC OPAMP GP 2 CIRCUIT 8SO |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2.2 MHz | - | 200 nA | 1 mV | 5.5mA (x2 Channels) | 200 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
TSB182IYSTLinear IC's |
4,824 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | Single Ended, Rail-to-Rail | 1.7V/µs | 3 MHz | - | 500 pA | 20 µV | 670µA (x2 Channels) | 27 mA | 4 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-MiniSO |
|
|
TSB182IYDTLinear IC's |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | Single Ended, Rail-to-Rail | 1.7V/µs | 3 MHz | - | 500 pA | 20 µV | 670µA (x2 Channels) | 27 mA | 4 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
TSV794IDTSO 14 .15 TO JEDEC MS-012 |
987 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Rail-to-Rail | 30V/µs | 50 MHz | - | 1 pA | 200 µV | 5.5mA (x4 Channels) | 70 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SO |
|
|
TSB952IYQ2THIGH BANDWIDTH (52 MHZ), RAIL-TO |
3,000 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 30V/µs | 52 MHz | - | 6 pA | 3 mV | 2.6mA (x2 Channels) | 46 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-DFN (3x3) |
|
|
TSB952IYDTHIGH BANDWIDTH (52 MHZ), RAIL-TO |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 30V/µs | 52 MHz | - | 6 pA | 2 mV | 2.6mA (x2 Channels) | 46 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
TS954IYDTIC OPAMP GP 4 CIRCUIT 14SO |
2,487 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA (x4 Channels) | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
