Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9452101M2AIC OPAMP GP 4 CIRCUIT 20CLCC |
1,387 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 4 | - | 0.15V/µs | 500 kHz | - | 40 pA | 40 µV | 525µA (x4 Channels) | 25 mA | 4 V | 40 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
5962-9683901MPAIC OPAMP VFB 1 CIRCUIT 8CERDIP |
1,847 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | Rail-to-Rail | - | - | - | - | - | - | - | 3 V | 12 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD522SD/883BIC INST AMP 1 CIRCUIT 14CERDIP |
4,075 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 0.1V/µs | 1.5 kHz | 300 kHz | 25 nA | 200 µV | 10mA | - | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
|
AD524SE/883BIC INST AMP 1 CIRCUIT 20CLCC |
1,833 |
|
Datasheet | - | 20-CLCC | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 50 nA | 100 µV | 3.5mA | - | 12 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
AD600SQ/883BIC AMP VGA DUAL LN 50MA 16CERDIP |
3,941 |
|
Datasheet | X-AMP® | 16-CDIP (0.300", 7.62mm) | Tube | Active | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | - | 50 mA | 9.5 V | 10.5 V | -55°C ~ 125°C | - | - | Through Hole | 16-CERDIP |
|
|
AD603SQ/883BIC VARIABLE GAIN 1 CIRC 8CERDIP |
1,207 |
|
Datasheet | X-AMP® | 8-CDIP (0.300", 7.62mm) | Tube | Active | Variable Gain | 1 | - | 275V/µs | - | 90 MHz | 200 nA | - | 12.5mA | 50 mA | 9.5 V | 12.6 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
|
AD704SE/883BIC OPAMP GP 4 CIRCUIT 20CLCC |
1,213 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 4 | - | - | - | - | 700 pA | 150 µV | - | - | 4 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883B | Surface Mount | 20-CLCC (9x9) |
|
|
AD708SQ/883BIC OPAMP GP 2 CIRCUIT 8CERDIP |
1,444 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 0.3V/µs | 900 kHz | - | 500 pA | 5 µV | 4.5mA (x2 Channels) | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
|
AD712SQ/883BIC OPAMP JFET 2 CIRCUIT 8CERDIP |
2,580 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 20V/µs | 4 MHz | 4 MHz | 25 pA | 300 µV | 5mA | 25 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
|
AD811SE/883BIC OPAMP VID HPERFORM 20CLCC |
3,569 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 1 | - | 2500V/µs | - | 140 MHz | 2 µA | 500 µV | 16.5mA | 100 mA | 9 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883B | Surface Mount | 20-CLCC (9x9) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
