Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4505-1ACBZ-RLIC OPAMP VFB 1 CIRCUIT 6WLCSP |
1,300 |
|
Datasheet | - | 6-UFBGA, WLCSP | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 0.006V/µs | 50 kHz | - | 500 nA | 500 µV | 9µA | 40 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLCSP (0.91x1.39) |
|
ADA4051-2ACPZ-RLIC OPAMP ZERO-DRIFT 2CIRC 8LFCSP |
4,602 |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Chopper (Zero-Drift) | 2 | Rail-to-Rail | 0.06V/µs | 125 kHz | - | 20 pA | 2 µV | 13µA (x2 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
ADA4841-2YCPZ-R2IC OPAMP GP 2 CIRCUIT 8LFCSP |
2,109 |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 13V/µs | - | 80 MHz | 3 µA | 40 µV | 1.2mA (x2 Channels) | 60 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP-WD (3x3) |
|
OP482ACBZ-RLIC OPAMP JFET 4 CIRCUIT 14WLCSP |
3,741 |
|
Datasheet | - | 14-UFBGA, WLCSP | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 9V/µs | 4 MHz | - | 3 pA | 200 µV | 210µA (x4 Channels) | 10 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-WLCSP (1.128x2.123) |
|
AD8574TRU-EP-RLIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
2,023 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Zero-Drift | 4 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA (x4 Channels) | 30 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
HMC914LP4ETRIC LIMITING 1 CIRCUIT 24SMT |
2,858 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | - | - | - | 47mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
|
HMC750LP4ETRIC LIMITING 1 CIRCUIT 24SMT |
4,232 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | - | - | 3 mV | 106mA | - | 4.6 V | 5.4 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
HMC914LP4EIC LIMITING 1 CIRCUIT 24SMT |
3,586 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Strip | Obsolete | Limiting | 1 | Differential | - | - | - | - | - | 47mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
5962-8771901EAIC INST AMP 1 CIRCUIT 16CDIP |
4,236 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 25 MHz | - | 50 nA | 200 µV | 5mA | - | 36 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 16-CDIP |
|
5962-8773802PAIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,420 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 0.3V/µs | - | 600 kHz | 1.2 nA | 10 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
