Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-8954401PAIC OPAMP GP 1 CIRCUIT 8CERDIP |
2,010 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 0.2V/µs | - | - | 30 pA | 10 µV | 380µA | - | 4.5 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
5962-89641012AIC OPAMP GP 40MHZ 20CLCC |
4,324 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 1 | - | 300V/µs | 40 MHz | - | 3.5 µA | 500 µV | 11mA | 50 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
|
5962-8964501PAIC OPAMP JFET 1 CIRCUIT 8CERDIP |
2,590 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 250 µV | 10mA | 50 mA | 9.5 V | 36 V | -55°C ~ 125°C (TA) | Military | MIL-STD-883 | Through Hole | 8-CERDIP |
|
|
5962-8964701PAIC OPAMP GP 1 CIRCUIT 8CERDIP |
2,978 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 300V/µs | 50 MHz | - | 3.3 µA | 500 µV | 5.3mA | 32 mA | 9 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883B | Through Hole | 8-CERDIP |
|
5962-8980101CAIC OPAMP GP 4 CIRCUIT 14CERDIP |
2,121 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 1V/µs | 3 MHz | 3 MHz | 180 nA | 300 µV | - | - | 10 V | 30 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
|
5962-9151901M2AIC OPAMP JFET 2 CIRCUIT 20CLCC |
4,670 |
|
Datasheet | - | 20-CLCC | Tube | Active | J-FET | 2 | - | 22V/µs | 4.7 MHz | - | 30 pA | 200 µV | 5.6mA | 36 mA | 9 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883 | Surface Mount | 20-CLCC (9x9) |
|
|
5962-9151901MPAIC OPAMP JFET 2 CIRCUIT 8CERDIP |
3,988 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 22V/µs | 4.7 MHz | - | 30 pA | 200 µV | 5.6mA | 36 mA | 9 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | 8-CERDIP |
|
|
5962-9313101M2AIC OPAMP CFA 1 CIRCUIT 20CLCC |
4,933 |
|
Datasheet | - | 20-CLCC | Tube | Active | Current Feedback | 1 | - | 400V/µs | - | 140 MHz | 2 µA | 500 µV | 16.5mA | 100 mA | 9 V | 36 V | -55°C ~ 125°C (TA) | Military | MIL-STD-883 | Surface Mount | 20-CLCC (9x9) |
|
|
5962-9325801M2AIC OPAMP GP 4 CIRCUIT 20CLCC |
3,699 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 4 | - | 350V/µs | 28 MHz | - | 150 nA | 200 µV | 8mA (x4 Channels) | - | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
5962-9325801MCAIC OPAMP PREC 28MHZ QUAD 14CDIP |
2,697 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 350V/µs | 28 MHz | - | 150 nA | 200 µV | 8mA (x4 Channels) | - | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
