Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8001AQIC OPAMP CFA 1 CIRCUIT 8CERDIP |
2,667 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 1 | - | 1200V/µs | - | 880 MHz | 5 µA | 2 mV | 5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD8674ARZ-REELIC OPAMP GP 4 CIRCUIT 14SOIC |
1,860 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x4 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
AD548SQ/883BIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,268 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | 10 pA | 750 µV | 170µA | 15 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
LT1463CS#PBFIC OPAMP JFET 4 CIRCUIT 14SO |
4,299 |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 0.13V/µs | 175 kHz | - | 1 pA | 600 µV | 28µA (x4 Channels) | 17 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
AD745KR-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
2,914 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 100 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD745KR-16-REEL7IC OPAMP JFET 1 CIRCUIT 16SOIC |
4,675 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 100 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
OP14Z/883CIC OPAMP GP 2 CIRCUIT 8CERDIP |
2,702 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1.3 MHz | - | 20 nA | 1 mV | - | - | 44 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1491AIS#TRPBFIC OPAMP GP 4 CIRCUIT 14SO |
1,632 |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.06V/µs | 200 kHz | - | 1 nA | 285 µV | 50µA (x4 Channels) | 25 mA | 2 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LTC6248HMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
4,367 |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 90V/µs | 180 MHz | 120 MHz | 400 nA | 100 µV | 1.25mA (x4 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 16-MSOP |
|
AD8225ARZ-R7IC INST AMP 1 CIRCUIT 8SOIC |
2,515 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 5V/µs | - | 900 kHz | 500 pA | 50 µV | 1.05mA | 18 mA | 3.4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
