Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4091-4ARUZ-RLIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,839 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.46V/µs | 1.27 MHz | - | 50 nA | 35 µV | 200µA (x4 Channels) | 20 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
OP260FZIC OPAMP CFA 2 CIRCUIT 8CERDIP |
1,094 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 2 | - | 550V/µs | - | 90 MHz | 4 µA | 2 mV | 9mA | - | 18 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
OP05Z/883CIC INST AMP 1 CIRCUIT 8CERDIP |
224 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.3V/µs | - | - | 1 nA | 200 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
ADA4610-2BRZ-R7IC OPAMP JFET 2 CIRCUIT 8SOIC |
2,029 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | Rail-to-Rail | 61V/µs | 16.3 MHz | 9.5 MHz | 5 pA | 200 µV | 1.6mA (x2 Channels) | 79 mA | 10 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
5962-8770602GAIC OPAMP JFET 1 CIRCUIT TO99-8 |
607 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 50V/µs | 28 MHz | - | 30 pA | 400 µV | 4.6mA | - | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
LT1462ACS8#TRPBFIC OPAMP JFET 2 CIRCUIT 8SO |
1,054 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 0.13V/µs | 175 kHz | - | 1 pA | 600 µV | 28µA (x2 Channels) | 17 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD524AR-16IC INST AMP 1 CIRCUIT 16SOIC |
3,387 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 50 nA | 250 µV | 3.5mA | - | 12 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
OP08EZIC OPAMP GP 1 CIRCUIT 8CERDIP |
2,049 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Differential | 0.12V/µs | - | - | 800 pA | 70 µV | - | - | 20 V | 20 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
AD8024ARZ-REEL7IC OPAMP CFA 4 CIRCUIT 16SOIC |
4,772 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 4 | - | 390V/µs | - | 200 MHz | 1 µA | 2 mV | 16mA | 50 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OP06CZ/883CIC INST AMP 1 CIRCUIT 8CERDIP |
455 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 100V/µs | - | - | - | - | - | - | 6 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
