Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD518JH/+IC OPAMP GP 1 CIRCUIT TO99 |
2,766 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 70V/µs | 12 MHz | - | 120 nA | 2 mV | 5µA | 10 mA | - | - | -55°C ~ 125°C | - | - | Through Hole | TO-99 |
|
AD841JQIC OPAMP GP 40MHZ 50MA 14CDIP |
9,767 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 40 MHz | - | 3.5 µA | 800 µV | 11mA | 50 mA | 10 V | 36 V | 0°C ~ 75°C | - | - | Through Hole | 14-CERDIP |
|
SMP10FYIC SAMPL/HOLD 1 CIRCUIT 14CERDIP |
825 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Sample and Hold | 1 | - | 10V/µs | 100 kHz | - | 55 nA | - | - | - | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-CERDIP |
|
ADN2891ACPZ-500RL7IC LIMITING 1 CIRCUIT 16LFCSP |
4,633 |
|
Datasheet | - | 16-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Limiting | 1 | Differential | - | - | - | - | 100 µV | 45mA | - | 2.9 V | 3.6 V | -40°C ~ 95°C | - | - | Surface Mount | 16-LFCSP-VQ (3x3) |
|
AD745JR-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
1,022 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 250 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LTC6416CDDB#TRMPBFIC BUFFER 1 CIRCUIT 10DFN |
500 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | Buffer | 1 | Differential | 3400V/µs | - | 2 GHz | 5 µA | 500 µV | 42mA | 20 mA | 2.7 V | 3.9 V | 0°C ~ 70°C | - | - | Surface Mount | 10-DFN (3x2) |
|
|
AD743JR-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
2,908 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 1 | - | 2.8V/µs | - | 4.5 MHz | 250 pA | 250 µV | 8.1mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD743JR-16-REELIC OPAMP JFET 1 CIRCUIT 16SOIC |
3,758 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 2.8V/µs | - | 4.5 MHz | 250 pA | 250 µV | 8.1mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD743JR-16-REEL7IC OPAMP JFET 1 CIRCUIT 16SOIC |
1,066 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 2.8V/µs | - | 4.5 MHz | 250 pA | 250 µV | 8.1mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
OP12EZIC OPAMP GP 1 CIRCUIT 8CERDIP |
2,132 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | - | - | - | 3 nA | 350 µV | - | - | 40 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
