Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6101HVACS5#TRPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
3,662 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 85 µV | 350µA | 1 mA | 5 V | 100 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-5 |
|
OP213EPIC OPAMP GP 2 CIRCUIT 8DIP |
4,733 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1.2V/µs | 3.4 MHz | - | 240 nA | 100 µV | - | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LTC6259HDC#TRMPBFIC OPAMP GP 2 CIRCUIT 8DFN |
1,922 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 0.24V/µs | 1.3 MHz | - | 5 nA | 100 µV | 20µA (x2 Channels) | 10 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (2x2) |
|
LTC6259HTS8#TRMPBFIC OPAMP GP 2 CIRCUIT TSOT23-8 |
813 |
|
Datasheet | - | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 0.24V/µs | 1.3 MHz | - | 5 nA | 100 µV | 20µA (x2 Channels) | 10 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-8 |
|
|
LTC6262HTS8#TRPBFIC OPAMP GP 2 CIRCUIT TSOT23-8 |
4,304 |
|
Datasheet | - | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 7V/µs | 30 MHz | - | 10 nA | 50 µV | 245µA (x2 Channels) | 40 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-8 |
|
5962-8980102CAIC OPAMP GP 4 CIRCUIT 14CERDIP |
832 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 1V/µs | - | 3 MHz | 300 nA | 600 µV | - | - | 10 V | 30 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
AD707SHIC OPAMP GP 1 CIRCUIT TO99-8 |
308 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.3V/µs | 900 kHz | - | 1.5 nA | 10 µV | 2.5mA | 10 mA | 22 V | 22 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
LTC1152IS8#TRPBFIC OPAMP ZERO-DRIFT 1 CIRC 8SO |
1,022 |
|
Datasheet | C-Load™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.5V/µs | 700 kHz | - | 10 pA | 1 µV | 2.2mA | - | 2.7 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
AD705AZIC OPAMP GP 1 CIRCUIT 8CERDIP |
674 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.15V/µs | - | - | 10 pA | 5 µV | 380µA | 15 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1672CS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
190 |
|
Datasheet | Over-The-Top® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
