Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8206WHRZ-RLIC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,088 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | - | 0.5V/µs | - | 100 kHz | - | 2 mV | 2mA | - | 4.5 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-SOIC |
|
|
AD8031BR-REEL7IC OPAMP VF R-R LP LDIST 8SOIC |
750 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 35V/µs | - | 80 MHz | 450 nA | 500 µV | 900µA | 15 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OP05BICJIC INST AMP 1 CIRCUIT TO99 |
503 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Instrumentation | 1 | - | 0.3V/µs | - | - | 1 nA | 200 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99 |
|
LT1801IDD#TRPBFIC OPAMP GP 2 CIRCUIT 8DFN |
3,297 |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 80 MHz | - | 25 nA | 75 µV | 1.6mA (x2 Channels) | 50 mA | 2.3 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
AD8047ANIC OPAMP VF GP LDIST 50MA 8DIP |
3,008 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 750V/µs | - | 250 MHz | 1 µA | 1 mV | 5.8mA | 50 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD8390ARCZIC AMP DIFF LP LDIST 16QSOP |
2,070 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) Exposed Pad | Tube | Obsolete | Differential | 1 | Differential | 300V/µs | - | 60 MHz | 4 µA | 1 mV | 10mA | 400 mA | 10 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP-EP |
|
|
LT1636IDD#TRPBFIC OPAMP GP 1 CIRCUIT 8DFN |
4,852 |
|
Datasheet | Over-The-Top® | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.075V/µs | 220 kHz | - | 4 nA | 125 µV | 50µA | 30 mA | 2.7 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
AD8011ARIC OPAMP CFA 1 CIRCUIT 8SOIC |
3,414 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 3500V/µs | - | 400 MHz | 5 µA | 2 mV | 1.3mA | 30 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC6253IDC#TRPBFIC OPAMP GP 2 CIRCUIT 8DFN |
2,760 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 280V/µs | 720 MHz | 400 MHz | 1.4 µA | 100 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (2x2) |
|
AD849JR-REEL7IC OPAMP GP 1 CIRCUIT 8SOIC |
1,186 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 300V/µs | 175 MHz | - | 3.3 µA | 500 µV | 5.1mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
