Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8008ARM-REEL7IC OPAMP CF DUAL ULDIST LN 8MSOP |
3,000 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Current Feedback | 2 | - | 1000V/µs | - | 500 MHz | 4 µA | 500 µV | 9mA (x2 Channels) | 130 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
OP221GSIC OPAMP GP DUAL LP 8SOIC |
471 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Single-Ended | 0.3V/µs | - | 600 kHz | 70 nA | 250 µV | 850µA (x2 Channels) | - | 5 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8066ARIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,078 |
|
Datasheet | FastFET™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 180V/µs | - | 155 MHz | 3 pA | 400 µV | 6.6mA (x2 Channels) | 30 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC6240HS5#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-5 |
4,047 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.2 pA | 50 µV | 2mA | 30 mA | 2.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
LT1810IS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
1,609 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 350V/µs | 180 MHz | 320 MHz | 2 µA | 800 µV | 15mA (x2 Channels) | 85 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
OP16FJIC OPAMP JFET 1 CIRCUIT TO99 |
5,031 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 21V/µs | 7.6 MHz | - | 30 pA | 400 µV | 4.6mA | - | 44 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | TO-99 |
|
OP11GPIC OPAMP QUAD 741-TYPE 14-DIP |
993 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 1V/µs | 3 MHz | - | 300 nA | 1.2 mV | - | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
AD8546ARMZ-R7IC CMOS 2 CIRCUIT 8MSOP |
2,904 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.08V/µs | 200 kHz | 310 kHz | 5 pA | 3 mV | 18µA (x2 Channels) | 12 mA | 2.7 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8031BR-REELIC OPAMP VF R-R LP LDIST 8SOIC |
7,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 35V/µs | - | 80 MHz | 450 nA | 500 µV | 900µA | 15 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8048ANIC OPAMP VF GP LDIST 50MA 8DIP |
57,178 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1000V/µs | - | 260 MHz | 1 µA | 1 mV | 5.9mA | 50 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
