Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4310-1ARHZ-RLIC OPAMP CFA 2 CIRCUIT 10MSOP |
1,536 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 820V/µs | - | 190 MHz | 6 µA | 1 mV | 7.6mA (x2 Channels) | - | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP-EP |
|
AD8002ARM-REEL7IC OPAMP CF DUAL LP LDIST 8MSOP |
18,000 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 600 MHz | 5 µA | 2 mV | 10mA (x2 Channels) | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8002ARM-REELIC OPAMP CF DUAL LP LDIST 8MSOP |
17,900 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 600 MHz | 5 µA | 2 mV | 10mA (x2 Channels) | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
OP21GZIC OPAMP GP 1 CIRCUIT 8CERDIP |
7,569 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.25V/µs | - | 600 kHz | 50 nA | 40 µV | 230µA | - | 5 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
|
OP32BZIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,301 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.5V/µs | 4.5 MHz | - | - | - | - | - | 3 V | 30 V | - | - | - | Through Hole | 8-CERDIP |
|
AD8029AKS-R2IC AMP GP R-R LP 170MA SC70-6 |
3,331 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Cut Tape (CT) | Obsolete | General Purpose | 1 | Rail-to-Rail | 63V/µs | - | 125 MHz | 1.7 µA | 2 mV | 1.4mA | 170 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
OP270-019ZIC OPAMP GP 2 CIRCUIT 8CERDIP |
454 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | - | - | - | - | - | - | - | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
LT1722CS5#TRPBFIC OPAMP VFB 1 CIRCUIT TSOT23-5 |
3,893 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 70V/µs | 200 MHz | - | 40 nA | 150 µV | 3.7mA | 50 mA | 5 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-5 |
|
OP297GPIC OPAMP GP 500KHZ DUAL 8DIP |
9,798 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.15V/µs | 500 kHz | - | 50 pA | 80 µV | 525µA (x2 Channels) | - | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT6200IS6#TRPBFIC BUFFER 1 CIRCUIT TSOT23-6 |
4,028 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | Buffer | 1 | Rail-to-Rail | 50V/µs | 165 MHz | - | 23 µA | 2.5 mV | 20mA | 90 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-6 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
