Hot Swap Controllers
Review Hot Swap Controllers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Number of Channels | Internal Switch(s) | Applications | Features | Programmable Features | Voltage - Supply | Current - Output (Max) | Operating Temperature | Grade | Qualification | Current - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TPS2393APWIC HOT SWAP CTRLR -48V 14TSSOP |
1,762 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Auto Retry | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | -80V ~ -20V | - | -40°C ~ 85°C | - | - | 1.05 mA | Surface Mount | 14-TSSOP |
|
|
TPS2393PWIC HOT SWAP CTRLR -48V 14TSSOP |
4,323 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Auto Retry | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | -80V ~ -20V | - | -40°C ~ 85°C | - | - | 1.05 mA | Surface Mount | 14-TSSOP |
|
TPS2393DBTIC HOT SWAP CTRLR -48V 44TSSOP |
3,327 |
|
Datasheet | - | 44-TFSOP (0.173", 4.40mm Width) | Bulk | Obsolete | Hot Swap Controller | 1 | No | -48V | Auto Retry | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | -80V ~ -20V | - | -40°C ~ 85°C | - | - | 1.05 mA | Surface Mount | 44-TSSOP |
|
UCC3917NIC HOT SWAP CTRLR GP 16DIP |
2,668 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Hot Swap Controller | 1 | No | General Purpose | UVLO | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault | 15V ~ 1000V | - | 0°C ~ 70°C | - | - | 5 mA | Through Hole | 16-PDIP |
|
TPS2301IPWG4IC DUAL HOTSWAP PWR CONT 20TSSOP |
205 |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tube | Active | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 13V, 3V ~ 5.5V | - | -40°C ~ 85°C | - | - | 5 µA | Surface Mount | 20-TSSOP |
|
UCC3913DIC HOT SWAP CTRLR -48V 8SOIC |
1,411 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Auto Retry, UVLO | Circuit Breaker, Current Limit, Fault Timeout | - | - | 0°C ~ 70°C | - | - | 1 mA | Surface Mount | 8-SOIC |
|
UCC3921D/81143IC HOT SWAP CTRLR GP 8SOIC |
2,032 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Hot Swap Controller | 1 | No | General Purpose | UVLO | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault | -48V | - | 0°C ~ 70°C | - | - | 1 mA | Surface Mount | 8-SOIC |
|
UCC3915PWPTRIC HOT SWAP CTRLR GP 24HTSSOP |
4,930 |
|
Datasheet | - | 24-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | Yes | General Purpose | Thermal Limit | Circuit Breaker, Current Limit, Fault Timeout | 7V ~ 15V | 4A | 0°C ~ 70°C | - | - | 1 mA | Surface Mount | 24-HTSSOP |
|
TPS2458RHBRIC HOT SWAP CTRLR ATCA 32VQFN |
1,553 |
|
Datasheet | - | 32-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Hot Swap Controller, OR Controller | 2 | Both | ATCA, MicroTCA™ | Thermal Limit, UVLO | Circuit Breaker, Current Limit, Fault Timeout, Slew Rate | 3V ~ 4V, 8.5V ~ 15V | 165mA | -40°C ~ 85°C | - | - | 3.1 mA | Surface Mount | 32-VQFN (5x5) |
|
UCC3916DPIC HOT SWAP CTRLR SCSI 8SOIC |
2,224 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Hot Swap Controller | 1 | Yes | SCSI | Thermal Limit | Fault Timeout | 4V ~ 6V | 1.65A | 0°C ~ 70°C | - | - | 1 mA | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Hot Swap Controllers components used for?
Hot Swap Controllers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Hot Swap Controllers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Hot Swap Controllers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
