Hot Swap Controllers
Review Hot Swap Controllers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Number of Channels | Internal Switch(s) | Applications | Features | Programmable Features | Voltage - Supply | Current - Output (Max) | Operating Temperature | Grade | Qualification | Current - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TPS2310IPWIC HOT SWAP CTRLR GP 20TSSOP |
1,872 |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 13V, 3V ~ 5.5V | - | -40°C ~ 85°C | - | - | 500 µA | Surface Mount | 20-TSSOP |
|
|
TPS2301IPWRIC HOT SWAP CTRLR GP 20TSSOP |
3,962 |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 13V, 3V ~ 5.5V | - | -40°C ~ 85°C | - | - | 5 µA | Surface Mount | 20-TSSOP |
|
LM25061PMM-2/NOPBIC HOT SWAP CTRLR GP 10VSSOP |
1,195 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Hot Swap Controller | 1 | No | General Purpose | Auto Retry | Current Limit, Fault Timeout, UVLO | 2.9V ~ 17V | - | -40°C ~ 85°C | - | - | 1.6 mA | Surface Mount | 10-VSSOP |
|
TPS2331IPWIC HOT SWAP CTRLR GP 14TSSOP |
1,090 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 13V | - | -40°C ~ 85°C | - | - | 500 µA | Surface Mount | 14-TSSOP |
|
UCC3913NIC HOT SWAP CTRLR -48V 8DIP |
4,864 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Hot Swap Controller | 1 | No | -48V | Auto Retry, UVLO | Circuit Breaker, Current Limit, Fault Timeout | - | - | 0°C ~ 70°C | - | - | 1 mA | Through Hole | 8-PDIP |
|
TPS2321IDIC HOT SWAP CTRLR GP 16SOIC |
4,052 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 13V, 3V ~ 5.5V | - | -40°C ~ 85°C | - | - | 500 µA | Surface Mount | 16-SOIC |
|
|
TPS2320IDRIC HOT SWAP CTRLR GP 16SOIC |
4,670 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 13V, 3V ~ 5.5V | - | -40°C ~ 85°C | - | - | 500 µA | Surface Mount | 16-SOIC |
|
|
UCC3921NIC HOT SWAP CTRLR GP 8DIP |
3,250 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Hot Swap Controller | 1 | No | General Purpose | UVLO | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault | -48V | - | 0°C ~ 70°C | - | - | 1 mA | Through Hole | 8-PDIP |
|
LM25061PMME-1IC SUPERVISOR PWR SUP SUPPORT |
250 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UCC2913NIC HOT SWAP CTRLR -48V 8DIP |
4,208 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Hot Swap Controller | 1 | No | -48V | Auto Retry, UVLO | Circuit Breaker, Current Limit, Fault Timeout | - | - | -40°C ~ 85°C | - | - | 1 mA | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Hot Swap Controllers components used for?
Hot Swap Controllers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Hot Swap Controllers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Hot Swap Controllers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
