Instrumentation, Op Amps, Buffer Amps
Explore Instrumentation, Op Amps, Buffer Amps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
UPC813G2-E2-ALINEAR IC |
2,495 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
OPA2316IDRIC CMOS 2 CIRCUIT 8SOIC |
2,356 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6V/µs | 10 MHz | - | 5 pA | 500 µV | 400µA (x2 Channels) | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TP5534-SRIC CHOPPER 4 CIRCUIT 14-SOP |
2,331 |
|
Datasheet | TP553x | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 4 | Single Ended, Rail-to-Rail | 0.16V/µs | 350 kHz | - | 50 pA | 1 µV | 42µA (x4 Channels) | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOP |
|
|
BD5291GWL-E2INPUT/OUTPUT RAIL TO RAIL LOW IN |
2,955 |
|
Datasheet | - | 5-UFBGA, CSPBGA | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 2.5V/µs | 3.2 MHz | - | 1 pA | 100 µV | 650µA | 15 mA | 1.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 5-UCSP50L1 (0.84x1.14) |
|
|
TPA191A5-SC6RIC CURR SENSE 1 CIRCUIT SOT-363 |
2,880 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Single Ended, Rail-to-Rail | 2.5V/µs | - | 15 kHz | 22 µA | 180 µV | 80µA | - | 2.7 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-363 |
|
TS941AILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,540 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0045V/µs | 10 kHz | - | 1 pA | 5 mV | 1.2µA | 5 mA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
NCS20082DTBR2GIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,500 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 1 pA | 500 µV | 48µA (x2 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
NCS20092DTBR2GIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,500 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.15V/µs | 350 kHz | - | 1 pA | 500 µV | 23µA (x2 Channels) | 8.5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
|
NCV20082DTBR2GIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,490 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 1 pA | 500 µV | 48µA (x2 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
UPC452G2-E2-ALINEAR IC |
1,499 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MCP6292IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
2,364 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 6.5V/µs | 10 MHz | - | 1 pA | 300 µV | 600µA (x2 Channels) | 50 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA2607SIRUGRIC OPAMP |
2,844 |
|
Datasheet | - | 10-XFQFN | Tape & Reel (TR) | Active | CMOS | 2 | Push-Pull | 24V/µs | 50 MHz | 9 MHz | 3 pA | 120 µV | 900µA (x2 Channels) | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-X2QFN (2x1.5) |
|
|
READ4303GSP#GC0LEGACY LIC LEGACY TSSOP OPERATIO |
2,500 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC1251MP-KAA-E2-ALINEAR IC MSOP |
4,960 |
|
Datasheet | - | 8-TSSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull | - | - | - | 14 nA | 2 mV | 700µA | 40 mA | 3 V | 30 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
AS2333M8-13OPAMP GENERAL PURPOSE MSOP-8 T&R |
3,088 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.12V/µs | 350 kHz | - | 70 pA | 8 µV | 12µA (x2 Channels) | 25 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
TP1562AL1-FRIC OPAMP 2 CIRCUIT 8-DFN |
2,980 |
|
Datasheet | TP156XAL1 | 8-UFDFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 4.5V/µs | 6 MHz | - | 1 pA | 3 mV | 600µA (x2 Channels) | 100 mA | 2.5 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (2x2) |
|
|
OPA4310IPWRQUAD, 5.5-V, 3-MHZ 150-MA HIGH-O |
2,699 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4742GR-9LG-E1-ALINEAR IC |
2,500 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC842GR-9LG-E1-ALINEAR IC |
2,500 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4082G2-E2-ALINEAR IC |
2,500 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
