Instrumentation, Op Amps, Buffer Amps
Explore Instrumentation, Op Amps, Buffer Amps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MCP6294IPWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,824 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 6.5V/µs | 10 MHz | - | 1 pA | 300 µV | 600µA (x4 Channels) | 25 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
MCP60721T-E/OTSINGLE, 10MHZ OP AMP, E TEMP |
3,350 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 15V/µs | 10 MHz | - | 0.4 pA | 25 µV | 720µA | 57 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
REAC1251GSP#GC0LEGACY LIC LEGACY MSOP OPERATION |
2,500 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
TLC272BIPIC CMOS 2 CIRCUIT 8DIP |
990 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 290 µV | 1.4mA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
UPC1251G2-E2-ALINEAR IC |
2,494 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4094G2-E2-ALINEAR IC |
1,622 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4574GR-9LG-E1-ALINEAR IC |
4,659 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
BD12730G-GTRIC OPAMP GP 1 CIRCUIT 5SSOP |
2,785 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.4V/µs | 1 MHz | - | 50 nA | 5 mV | 320µA | 12 mA | 1.8 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 5-SSOP |
|
|
TPA6551-S5TRIC OPAMP 1 CIRCUIT SOT-23-5 |
2,990 |
|
Datasheet | TPA655x | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 3V/µs | 10 MHz | - | 400 nA | 250 µV | 900µA | 120 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
TLV3544QPWRQ1IC CMOS 4 CIRCUIT 14TSSOP |
2,000 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 150V/µs | 100 MHz | 90 MHz | 3 pA | 2 mV | 5.2mA (x4 Channels) | 100 mA | 2.5 V | 5.5 V | -55°C ~ 150°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
APX358SG-13IC OPAMP GP 2 CIRCUIT 8SOP |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 10 nA | 1.7 mV | 190µA (x2 Channels) | 90 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOP |
|
LMV324Q1MAX/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
1,687 |
|
Datasheet | LMV® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 410µA (x4 Channels) | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
|
UPC1251G2-E1-ALINEAR IC OPERATION AMPLIFIER SO |
8,413 |
|
Datasheet | - | 8-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull | - | - | - | 14 nA | 2 mV | 700µA | 70 mA | 3 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOP |
|
INA4181A2QPWRQ1IC CURR SENSE 1 CIRCUIT 20TSSOP |
3,430 |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Differential, Rail-to-Rail | 2V/µs | 350 kHz | 350 kHz | 75 µA | 100 µV | - | 8 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-TSSOP |
|
INA186A4QDBVRQ1IC CURR SENSE 1 CIRCUIT SOT23-5 |
2,955 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | - | 33 kHz | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
|
UPC811G2-E2-ALINEAR IC |
2,428 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4062G2-E2-ALINEAR IC |
1,432 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
TSV324IYPTIC OPAMP GP 4 CIRCUIT 14TSSOP |
12,382 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.6V/µs | 1.4 MHz | - | 70 nA | 200 µV | 500µA | 80 mA | 2.5 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
LMV716MM/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
924 |
|
Datasheet | LMV® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Differential, Rail-to-Rail | 5.8V/µs | 5 MHz | - | 0.6 pA | 1.6 mV | 1.6mA (x2 Channels) | 41 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
UPC813G2-E1-ALINEAR IC |
2,497 |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
