Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2607H/2K5IC CMOS 2 CIRCUIT 8HSOP |
62,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 24V/µs | 50 MHz | 9 MHz | 3 pA | 120 µV | 900µA (x2 Channels) | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-HSOP |
|
OPA2607HIC CMOS 2 CIRCUIT 8HSOP |
18,158 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 24V/µs | 50 MHz | 9 MHz | 3 pA | 120 µV | 900µA (x2 Channels) | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-HSOP |
|
OPA4343EA/250G4IC CMOS 4 CIRCUIT 16SSOP |
230 |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 2 mV | 850µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
OPA2658PIC OPAMP CFA 2 CIRCUIT 8DIP |
11,903 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 2 | - | 1700V/µs | - | - | 30 µA | 3 mV | 10mA (x2 Channels) | 120 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA2234PIC OPAMP GP 2 CIRCUIT 8DIP |
12,775 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.2V/µs | 350 kHz | - | 12 nA | 70 µV | - | 22 mA | 2.7 V | 36 V | - | - | - | Through Hole | 8-PDIP |
|
OPA2650PIC VOLTAGE FEEDBACK 2 CIRC 8DIP |
4,325 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 2 | - | 240V/µs | 360 MHz | - | 5 µA | 1 mV | 11mA (x2 Channels) | 110 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA3680U/2K5IC OPAMP VFB 3 CIRCUIT 16SOIC |
15,000 |
|
Datasheet | SpeedPlus™ | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 3 | - | 1000V/µs | 250 MHz | 300 MHz | 8 µA | 1 mV | 5.1mA (x3 Channels) | 150 mA | 10 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
OPA3680UIC OPAMP VFB 3 CIRCUIT 16SOIC |
7,296 |
|
Datasheet | SpeedPlus™ | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 3 | - | 1000V/µs | 250 MHz | 300 MHz | 8 µA | 1 mV | 5.1mA (x3 Channels) | 150 mA | 10 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
INA131AP-1IC INST AMP 1 CIRCUIT 8DIP |
1,948 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 0.7V/µs | - | 70 kHz | 500 pA | 25 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA3681UIC OPAMP CFA 3 CIRCUIT 16SOIC |
14,463 |
|
Datasheet | SpeedPlus™ | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 3 | - | 2100V/µs | - | 280 MHz | 30 µA | 1.3 mV | 18mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
