Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2650UIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
7,784 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 240V/µs | 360 MHz | - | 5 µA | 1 mV | 11mA (x2 Channels) | 110 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2682NIC BUFFER 2 CIRCUIT 14SOIC |
2,342 |
|
Datasheet | SpeedPlus™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 2 | - | 2100V/µs | - | 330 MHz | 10 µA | 1.3 mV | 6mA (x2 Channels) | 190 mA | 10 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA2607UIC CMOS 2 CIRCUIT 8SOIC |
3,232 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 24V/µs | 50 MHz | 9 MHz | 3 pA | 120 µV | 900µA (x2 Channels) | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2607U/2K5IC CMOS 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 24V/µs | 50 MHz | 9 MHz | 3 pA | 120 µV | 900µA (x2 Channels) | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2681NIC OPAMP CFA 2 CIRCUIT 14SOIC |
11,062 |
|
Datasheet | SpeedPlus™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 2100V/µs | - | 280 MHz | 30 µA | 1.3 mV | 12mA (x2 Channels) | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA681PIC OPAMP CFA 1 CIRCUIT 8DIP |
5,835 |
|
Datasheet | SpeedPlus™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 2100V/µs | - | 280 MHz | 30 µA | 1.3 mV | 6mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA4342PAIC CMOS 4 CIRCUIT 14DIP |
43,423 |
|
Datasheet | MicroAmplifier™ | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.2 pA | 1 mV | 150µA (x4 Channels) | 15 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
OPA743PAIC CMOS 1 CIRCUIT 8DIP |
2,920 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 1 | Rail-to-Rail | 10V/µs | 7 MHz | - | - | - | - | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA137PIC OPAMP GP 1 CIRCUIT 8DIP |
1,990 |
|
Datasheet | MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 3.5V/µs | 1 MHz | - | 5 pA | 1.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA680PIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
5,024 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1800V/µs | 250 MHz | 400 MHz | 8 µA | 6 V | 5.1mA | 150 mA | 10 V | 32 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
