Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA338NAIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,000 |
|
Datasheet | OPA338 | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 4.6V/µs | 12.5 MHz | - | 0.2 pA | 500 µV | 525µA | 9 mA | 2.7 V | 5.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
AD8619ARZIC CMOS 4 CIRCUIT 14SOIC |
2,500 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 0.1V/µs | 400 kHz | - | 0.2 pA | 400 µV | 38µA (x4 Channels) | 80 mA | 1.8 V | 5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOP |
|
TLV2313IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.45V/µs | 1 MHz | - | 1 pA | 750 µV | 65µA (x2 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
TSV6392IDTIC CMOS 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | TSV639x | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 1.1V/µs | 2.4 MHz | - | 1 pA | 3 mV | 60µA (x2 Channels) | 72 mA | 1.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
TSV6392AIDTIC CMOS 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | TSV639xA | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 1.1V/µs | 2.4 MHz | - | 1 pA | 800 µV | 60µA (x2 Channels) | 72 mA | 1.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
OPA340NAIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,298 |
|
Datasheet | OPA340 | SC-74A, SOT-753 | Cut Tape (CT) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA | 50 mA | 2.7 V | 5.5 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
AD8534ARZIC OPAMP GP 4 CIRCUIT 14SOIC |
2,100 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 25 mV | 750µA (x4 Channels) | 250 mA | 2.7 V | 6 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOP |
|
|
AD8634HRZNIC OPAMP GP 2 CIRCUIT 8SOIC |
2,475 |
|
Datasheet | - | - | Cut Tape (CT) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
TLV2632IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | TLV263x | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 10V/µs | 9 MHz | - | 1 pA | 250 µV | 730µA (x2 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
LMV614MAXIC OPAMP GP 4 CIRCUIT 14SOIC |
2,500 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x4 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
