Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8532ARZIC OPAMP GP 2 CIRCUIT 8SOIC |
2,390 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 25 mV | 750µA (x2 Channels) | 250 mA | 2.7 V | 6 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOP |
|
TLV313IDBVRIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,000 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.45V/µs | 1 MHz | - | 1 pA | 750 µV | 65µA | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
AD8632ARTIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | AD8632xA | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 4V/µs | 6.5 MHz | - | 1 pA | 800 µV | 480µA (x2 Channels) | 40 mA | 2.3 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
OPA2333AIDRIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | Single Ended, Rail-to-Rail | 0.16V/µs | 350 kHz | - | 70 pA | 2 µV | 17µA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
LMV724MIC OPAMP GP 2 CIRCUIT 14SOIC |
2,500 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 9V/µs | 10 MHz | - | 1 pA | 800 µV | 1mA (x4 Channels) | 40 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOP |
|
|
AD8613AKSZIC OPAMP GP 1 CIRCUIT SC70-5 |
2,750 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Cut Tape (CT) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.1V/µs | 400 kHz | - | 0.2 pA | 400 µV | 38µA | 80 mA | 1.8 V | 5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-5 |
|
AD8532ARUZIC OPAMP GP 2 CIRCUIT 8TSSOP |
4,000 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 25 mV | 750µA (x2 Channels) | 250 mA | 2.7 V | 6 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
TSV632AIDTIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | TSV63xA | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.34V/µs | 880 kHz | - | 1 pA | 800 µV | 60µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
TSV632IDTIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | TSV63x | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.34V/µs | 880 kHz | - | 1 pA | 3 mV | 60µA (x2 Channels) | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
AD8544ARZIC OPAMP GP 4 CIRCUIT 14SOIC |
2,500 |
|
Datasheet | AD854xA | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 0.8V/µs | 1.1 MHz | - | 1 pA | 500 µV | 85µA (x4 Channels) | 40 mA | 2.3 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
