Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2404IPWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,533 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA (x4 Channels) | 200 µA | 2.5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
TLE2022AQDRG4Q1IC OPAMP GP 2 CIRCUIT 8SOIC |
4,984 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.5V/µs | 1.7 MHz | - | 33 nA | 100 µV | 170µA (x2 Channels) | 30 mA | 4 V | 40 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TLC2654IPG4IC OPAMP GP 1 CIRCUIT 8DIP |
4,769 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 1 | - | 3.7V/µs | 1.9 MHz | - | 50 pA | 5 µV | 1.5mA | 50 mA | 4.6 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMC6682AINIC CMOS 2 CIRCUIT 14DIP |
3,896 |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 1.2V/µs | 1.2 MHz | - | 2 µA | 5 mV | 1.6mA (x2 Channels) | 70 mA | 1.8 V | 10 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
TLE2064MDRIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,171 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
INA338AIDGSRIC INST AMP 1 CIRCUIT 10VSSOP |
3,327 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | - | - | - | 1 kHz | 200 pA | 20 µV | 2.4mA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
INA338AIDGSRG4IC INST AMP 1 CIRCUIT 10VSSOP |
3,132 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | - | - | - | 1 kHz | 200 pA | 20 µV | 2.4mA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
THS4012IDRIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
4,682 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4012IDRG4IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
1,011 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLE2024AIDWIC OPAMP GP 4 CIRCUIT 16SOIC |
2,019 |
|
Datasheet | Excalibur™ | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | General Purpose | 4 | - | 0.7V/µs | 2.8 MHz | - | 45 nA | 80 µV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
