Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2654AQ-8DG4IC OPAMP GP 1 CIRCUIT 8SOIC |
2,300 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 3.7V/µs | 1.9 MHz | - | 50 pA | 4 µV | 1.5mA | 50 mA | 4.6 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA37GPG4IC OPAMP GP 1 CIRCUIT 8DIP |
1,514 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 11.9V/µs | 63 MHz | - | 15 nA | 25 µV | 3.3mA | 25 mA | 8 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TL054IDIC OPAMP JFET 4 CIRCUIT 14SOIC |
2,570 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 560 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
INA190A5IDDFTIC CURR SENSE 1 CIRCUIT TSOT23-8 |
3,961 |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | 27 kHz | - | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | TSOT-23-8 |
|
LMP8481ATQDGKRQ1IC CURR SENSE 1 CIRCUIT 8VSSOP |
3,672 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | 270 kHz | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
|
LPC660AIM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
3,658 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 160µA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA1632DGNG4IC AUDIO 1 CIRCUIT 8HVSSOP |
3,894 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Audio | 1 | Differential | 50V/µs | - | 180 MHz | 2 µA | 500 µV | 14mA | 85 mA | 5 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
OPA1632DG4IC AUDIO 1 CIRCUIT 8SOIC |
3,497 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Audio | 1 | Differential | 50V/µs | - | 180 MHz | 2 µA | 500 µV | 14mA | 85 mA | 5 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA842IDG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,521 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 400V/µs | 200 MHz | - | 20 µA | 300 µV | 20.2mA | 100 mA | 10 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS3110IDRIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,497 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 1300V/µs | - | 100 MHz | 1.5 µA | 3 mV | 4.8mA | 260 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
