Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2274CNSG4IC OPAMP GP 4 CIRCUIT 14SO |
2,167 |
|
Datasheet | - | 14-SOIC (0.209", 5.30mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SO |
|
OPA2369AIDCNTG4IC OPAMP GP 2 CIRCUIT SOT23-8 |
4,357 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 10 pA | 250 µV | 700nA (x2 Channels) | 10 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
OPA2369AIDGKTG4IC OPAMP GP 2 CIRCUIT 8VSSOP |
2,284 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 10 pA | 250 µV | 700nA (x2 Channels) | 10 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2454CPWRG4IC OPAMP GP 4 CIRCUIT 14TSSOP |
1,348 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 14-TSSOP |
|
TLC2264AIDG4IC OPAMP GP 4 CIRCUIT 14SOIC |
1,525 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 850µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
TLV2452CDGKIC OPAMP GP 2 CIRCUIT 8VSSOP |
4,918 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x2 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLC27M9CDRIC CMOS 4 CIRCUIT 14SOIC |
1,711 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 210 µV | 570µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC083CDG4IC OPAMP GP 2 CIRCUIT 14SOIC |
4,805 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x2 Channels) | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
TLV2462CDGKG4IC OPAMP GP 2 CIRCUIT 8VSSOP |
2,043 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
|
TLC27L9CDRIC OPAMP GP 4 CIRCUIT 14SOIC |
3,539 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.03V/µs | 110 kHz | - | 0.7 pA | 200 µV | 57µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
