Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2142CDRG4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,350 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA743UAG4IC OPAMP GP 1 CIRCUIT 8SOIC |
3,976 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2434CDRIC CMOS 4 CIRCUIT 14SOIC |
2,682 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x4 Channels) | 50 mA | 2.7 V | 10 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
TLC2254IDIC OPAMP GP 4 CIRCUIT 14SOIC |
4,481 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
LMV344MTXIC CMOS 4 CIRCUIT 14TSSOP |
3,730 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.02 pA | 700 µV | 107µA (x4 Channels) | 113 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMV881LEX/NOPBIC OPAMP GP 1 CIRCUIT 6USON |
2,207 |
|
Datasheet | - | 6-UFDFN | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 12V/µs | 23 MHz | - | 0.1 pA | 273 µV | 1.9mA | 70 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-USON (1.5x1) |
|
LMC6035IMMXIC CMOS 2 CIRCUIT 8VSSOP |
4,599 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 2 | Differential, Rail-to-Rail | 1.5V/µs | 1.4 MHz | - | 0.02 pA | 500 µV | 650µA (x2 Channels) | 8 mA | 2 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV4113CDGQG4IC OPAMP GP 2 CIRCUIT 10HVSSOP |
3,372 |
|
Datasheet | - | 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA (x2 Channels) | 320 mA | 2.5 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 10-HVSSOP |
|
TLV2463CDGSG4IC OPAMP GP 2 CIRCUIT 10VSSOP |
2,065 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 10-VSSOP |
|
|
TLC2274ACDG4IC OPAMP GP 4 CIRCUIT 14SOIC |
2,114 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
